China Swimming Pool Heat Pump Manufacturers Suppliers Factory

Your Professional Swimming Pool Heat Pump Supplier

Zhejiang CEN New Energy Stock Co., Ltd. was established in 2001 and specializes in heat pump water heating solutions. With integrated R&D, manufacturing, and sales, we provide reliable heat pump controllers, water heaters, and tanks for residential and engineering markets worldwide.

Proven Industry Experience
With over 20 years of experience in thermal control and heat pump technology, we have long ranked among the top suppliers of solar water heater controllers in China, ensuring stable quality and mature engineering capability.

Complete In-House Manufacturing System
We operate our own heat pump, control system, and water tank production lines, supported by a 50,000 m² factory. This vertical integration allows consistent quality control, reliable delivery, and flexible project support.

Certified Products and Professional Testing
Our heat pump products are CE certified by TUV and tested in a GMP-certified laboratory, covering 1HP–30HP units under extreme temperatures from -30°C to 52°C, meeting the performance and safety expectations of global markets.

Parameter

Model		DSP02PS-P2D	DSP03PS-P2D	DSP04PS-P2D	DSP05PS-P5D	DSP06PS-P5D	DSP07PS-P7D	DSP08PS-P7D
Advised pool volume		25m³-50m³	30m³-60m³	35m³-70m³	60m³-100m³	65m³-110m³	70m³-130m³	80m³-150m³
Operating ambient air temperature		﹣5℃~43℃	﹣5℃~43℃	﹣5℃~43℃	﹣5℃~43℃	﹣5℃~43℃	﹣5℃~43℃	﹣5℃~43℃
Performance condition 1-Air: 26℃, RH80%, inlet/outlet water temperature: 26℃/28℃
Heating capacity	KW	2.72-11.00	3.50-14.20	4.24-17.45	5.75-23.24	6.22-25.13	6.62-29.03	7.71-31.73
COP		6.30-14.84	6.19-14.66	6.00-14.53	6.11-14.55	6.21-14.55	6.12-14.56	6.12-14.61
Performance condition 2-Air: 15℃, RH70%, inlet water/outlet temperature: 26℃/28℃
Heating capacity	KW	2.20-8.15	2.90-10.70	3.55-13.00	4.65-17.36	5.17-18.55	5.46-21.31	6.34-23.69
COP		4.95-7.85	4.95-7.65	4.85-7.49	4.81-7.65	4.93-7.55	4.97-7.52	4.91-7.61

Types of Swimming Pool Heat Pump

The swimming pool heat pumps produced by our company mainly include the following types:

Residential Pool Heat Pump
Residential pool heat pump is an energy-efficient device that works like an air conditioner in reverse, extracting heat from the outdoor air and transferring it to your pool water, allowing for comfortable swimming in cooler weather by using less energy than gas heaters and extending the swimming season.

Commercial Pool Heat Pump
Commercial Pool Heat Pump is a large, energy-efficient HVAC device that extracts heat from the air to warm large swimming pools and spas, using electricity to move heat rather than generate it, offering significant energy savings for hotels, resorts, water parks, and community centers while providing year-round comfort and extending swimming seasons.

Advantages of Swimming Pool Heat Pump

01/

Energy Efficiency That Saves You Money
Unlike traditional gas heaters that rely on burning fuel, pool heat pumps work by drawing in warm air from the environment and using it to heat your pool water. This process consumes far less energy, significantly reducing your monthly heating costs.

02/

Extend Your Swimming Season
When fall and winter roll around, unheated pools can become too cold to enjoy. A pool heat pump ensures that your water stays at a comfortable temperature, so you don’t have to cut your swimming season short.

03/

Low Maintenance and Long-Lasting Performance
One of the standout benefits of pool heat pumps is their durability. With proper care, they can last anywhere from 10 to 20 years, making them a solid long-term investment. Unlike gas heaters, which require frequent servicing, heat pumps have fewer components that need maintenance, saving you both time and money over the years.

04/

Quiet and Hassle-Free Operation
Nobody wants a noisy heater disrupting their backyard oasis. Thankfully, pool heat pumps operate much more quietly than traditional gas heaters. They also come with automatic temperature control, allowing you to set your preferred water temperature and let the system handle the rest—no constant adjustments required.

Installation Steps for Swimming Pool Heat Pumps

Switch Off the System & Drain the Filter

Safety first. Turn off the power, decompress the system, and remove the filter from plumbing positions if needed to prevent an arms race when adding or subtracting plumbing fittings.

Tap Into The Vernacular Pipeline

Normally, you would splice into your return line after it goes through the filter and chlorinator. Union connections or unionized isolation valves for easy service without emptying your pool.

Connect the Pump with PVC Pipes

Glue rapid-set PVC fittings, pool temp. Apply a thin and even layer of primer as well as cement. Verify that the correct slope for water run-off is important, and the pressure ratings of piping.

Wiring Up the Light

Requires a dedicated breaker, NOT on a shared circuit. Must be a lockable disconnect as per code.

Leak Test & System Start Up

Testing: Charge the system, check for leaks, then energize the power. There will be a hum from the unit, and then warmed water will be gently delivered. Electrical load, watch for a little while after startup,

Optimize and Balance

Set the thermostat on the pool for its desired temperature (usually between 78-82°F). Make sure your circulation pump operates for as long (usually 8–12 hours per day) as the heat pump produces output.

Precautions for Using Swimming Pool Heat Pumps

Clean the Heat Pump's Coils Regularly
The coils in your heat pump play a crucial role in the heat exchange process. Over time, dirt, debris, and even insects can accumulate on the coils, affecting their efficiency. When the coils are dirty, your heat pump has to work harder to heat your pool, leading to increased wear and tear.

Check and Clean the Air Filter
The air filter in your swimming pool heat pump helps keep dust, dirt, and other particles from entering the system. Over time, filters can become clogged, restricting airflow and making it difficult for the pump to operate efficiently. To prevent this, you should check and clean the air filter regularly.

Inspect the Fan and Fan Blades
The fan and fan blades are crucial for your heat pump’s ability to transfer heat. If these components become damaged or obstructed, the pump’s efficiency will drop, and it could even lead to more severe mechanical issues. Performing a quick inspection every few months can help you catch problems before they escalate.

Maintain Proper Water Flow
One of the key factors in the performance of a swimming pool heat pump is the flow of water through the system. If water flow is insufficient, it can cause the pump to overheat or shut down. On the other hand, too much flow can also strain the pump and reduce efficiency. It’s crucial to keep the water flow at an optimal level for the heat pump to function properly.

Schedule Regular Professional Maintenance
While DIY maintenance can go a long way, having a professional inspect your swimming pool heat pump once a year is essential. A qualified technician can perform a more thorough check, spot potential issues you may have missed, and make any necessary adjustments or repairs.

Packaging and Shipping

Packaging	Corrugated Box
Shipping	Shipping by sea, by air, by express are acceptable. According to your requirements.

Our Factory

Zhejiang CEN New Energy Stock Co., Ltd. was established in year 2001, in the early time, the company mainly produces solar water heater controllers and other related products.In 2009,General Manager Xia Qing decided to transform the product,especially set up the heat pump department.

Certifications

Our Business Partner

productcate-1-1

FAQ

Q: Is a heat pump for a pool worth it?

A: Heat pump pool heaters cost more than gas pool heaters, but they typically have much lower annual operating costs because of their higher efficiencies. With proper maintenance, heat pump pool heaters typically last longer than gas pool heaters. Therefore, you'll save more money in the long run.

Q: Do you leave a pool heat pump on all the time?

A: Leaving the pool heat pump on overnight contributes to a more stable pool temperature. If you prefer to enjoy a warm pool first thing in the morning or throughout the day without waiting for the heat pump to catch up, keeping it on during the night can be beneficial.

Q: What is the lifespan of a pool heat pump?

A: A pool heat pump typically lasts 10 to 15 years, with many lasting around a decade, but this depends heavily on maintenance, water chemistry, quality of the unit, and usage, with proper care extending life and poor conditions shortening it. Key factors include good water balance (preventing corrosion) and protecting the unit from harsh elements, with some high-quality models offering 10+ years of reliable service.

Q: Do pool heat pumps use a lot of electricity?

A: Heat pumps will use around 5,000 watts or 5 kilowatts per hour per 100,000 BTU's. For a typical size 100,000 BTU heat pump, that's 5 kilowatts per hour.

Q: Do pool heat pumps require maintenance?

A: The answer is yes. We recommend that owners clean their heat pump coils at least once a year, and that they check monthly to determine if more frequent cleaning is necessary. This will help maintain the units efficiency in transferring heat from the air to your pool water.

As one of the most professional swimming pool heat pump manufacturers and suppliers in China, we're featured by quality products and good service. Please rest assured to wholesale cheap swimming pool heat pump from our factory. For custom service, contact us now.

Swimming Pool Heat Pump